HG-HGS-HA-HAN

Mobile Compactors HG-HGS-HA-HAN

This mobile compactor is a flexible waste solution. For a wide variety of waste types including cardboard, plastic and combustible waste.
Ergänzen Sie Ihr Angebot
HG-HGS-HA-HAN
Mobile Compactors HG-HGS-HA-HAN
Beliebte Optionen
Wandmontierter Außentrichter
With a wall hopper you can handle your inside waste more efficiently. You need not go outside, but can load your waste directly into the baler through the wall.
Wall hopper enables constant baler filling
Fordern Sie ein Angebot an
Entleerung des Behälters im mobilen Verdichter mit Kippsystem im Freien
Lift and empty your bins into your compactor. The tipping system comes in integrated, stationary or movable versions.
Add a tipping system for seamless bin emptying
Fordern Sie ein Angebot an
HGS18 mit Führungsschienen und Hebevorrichtung
Ensure correct positioning of your mobile compactor on your hopper with guiding rails on the ground. The compactor is always returned to its right position after emptying.
Use guiding rails for correct mobile compactor positioning
Fordern Sie ein Angebot an
Wiegesystem für Verdichter im Lyngby Storcenter
Register and bill individual users for their exact amount of waste added. The compactor is installed on a weight which determines the loaded volume before compaction.
Intelligent weighing system lets you bill based on weight
Fordern Sie ein Angebot an
Angebotsdetails
HG-HGS-HA-HAN
Mobile Compactors HG-HGS-HA-HAN
Überblick
Wie man funktioniert
Sicherheit
Technische Spezifikationen
 

Press unit and container combined in one

A flexible solution that can be installed in a variety of settings. It requires no structural changes – just connect to appropriate power supply. The entire unit is picked up by truck for emptying.

 

Mobile compactor for every waste type

Use a mobile compactor for cardboard, paper, plastic and combustible waste.

HG-HGS-HA-HAN – flexible mobile compactors:

  • No special requirements for installation
  • Intelligent control unit for minimum maintenance and maximum output
  • Minimalistic control panel
  • Low noise level (<70 dB)
  • Conic design for easy discharge
  • Various possibilities for individual adjustments
  • Optional GSM fitting for machine monitoring
  1. Fill waste into the chamber.
  2. A horizontal press plate compacts your waste material.
  3. Continue until the machine shows full signal.
  4. Your waste collector picks up the entire unit.
  5. The empty mobile compactor is returned to its place.
Our equipment has the highest level of safety – don’t settle with less!
Schneckenverdichter bei Ikea Taastrup
Presskraft (t)25-30
WertstoffvolumenMittel
Einheit6-24
Abfallart-Symbol
Abfallarten
Pappe
Kunststofffolie
Gemischt
Papier
Kunststoff hart
Symbol für Abfallvolumen
Abfallvolumen
Mittel
Presskraft vertikal
DRÜCKEN SIE KRAFT
25-30 t
Produktoptionen
Passen Sie Ihre Maschine mit den optimalen Produktoptionen an Ihre Bedürfnisse an.
HG-HGS-HA-HAN HG-HGS-HA-HAN
Wandmontierter Außentrichter
Wall hopper enables constant baler filling
With a wall hopper you can handle your inside waste more efficiently. You need not go outside, but can load your waste directly into the baler through the wall.
Entleerung des Behälters im mobilen Verdichter mit Kippsystem im Freien
Add a tipping system for seamless bin emptying
Lift and empty your bins into your compactor. The tipping system comes in integrated, stationary or movable versions.
HGS18 mit Führungsschienen und Hebevorrichtung
Use guiding rails for correct mobile compactor positioning
Ensure correct positioning of your mobile compactor on your hopper with guiding rails on the ground. The compactor is always returned to its right position after emptying.
Wiegesystem für Verdichter im Lyngby Storcenter
Intelligent weighing system lets you bill based on weight
Register and bill individual users for their exact amount of waste added. The compactor is installed on a weight which determines the loaded volume before compaction.

Rüsten Sie Ihre Maschine mit BRA-IN auf

Verwandeln Sie Ihre Abfalldaten in echte Betriebseinsparungen und effektive Arbeitsabläufe

BRA-IN ist ein digitales Managementsystem für Ihre Ballenpressen und Verdichter, das Abfalldaten in Wert umwandelt. Es bietet Ihnen einen einfachen, aber effektiven Online-Überblick über den Maschinenstatus, die Leistung und den Servicebedarf.

Mit Echtzeiteinblicken, automatischen Benachrichtigungen und Fernwartung hilft BRA-IN Ihnen, Sammlungen zu optimieren, Ausfallzeiten zu reduzieren und Betriebskosten zu senken.

Heading for loop

FAQ
HG-HGS-HA-HAN HG-HGS-HA-HAN
Häufig gestellte Fragen und Antworten
Why should I choose a mobile compactor?
With a mobile compactor, structural changes to the site are not necessary. You simply connect the system to the local power supply and it is ready to use. This makes the mobile compactor a flexible solution that can be integrated into any environment – even for a limited time period.
What’s the difference between a static compactor and a mobile compactor?
In short, the difference between a static compactor and a mobile compactor is whether the press unit stays on-site or if it is attached to and follows the container. Static compactor A static compactor is designed to stay on-site. The press unit and the container unit are separate units and the press unit is bolted to a concrete base. The container is attached to the press unit by ratchets. When the container is full, it is picked up for emptying and a replacement container is put into position on the press unit. The static compactors are very well suited to handle very large amounts of waste and in situations where the is a need for constant filling. Mobile compactor In a mobile compactor, the press unit is integrated with the container. This means that the entire unit is picked up for emptying when it is full. The mobile compactor is often slightly smaller and have less capacity than a static compactor, because it must be easy to pick up and transport on a truck. The mobile compactor is suitable for applications where space is confined. They can handle a wide range of waste materials including cardboard, paper, plastic, combustible waste or organic waste.
Is a compactor safe to operate?
A compactor is very safe to operate. All our compactors are thoroughly tested to ensure that they meet the highest safety standards. Furthermore, all mechanical and electrical parts are placed inside the machine –out of reach for users. The control panel is placed on the outside of the machine and gives the user easy access to start the machine. An emergency stop is also placed on the control panel within fast and easy reach.
How do I know if I need a static compactor or a mobile compactor?
Whether you need a static compactor or a mobile compactor depends on a number of factors. What you need to consider is how much waste you have, what kind of waste material you have, your internal work processes, how much space you have for a compactor solution, and if the solution should be integrated in an existing facility.
What type of waste material can I put in a compactor?
That depends on the compactor. As a rule of thumb, you can use a compactor to compact all soft materials. Examples of soft materials include cardboard, shredded paper, news paper, paper bags, soft dry plastic, and PET bottles. There are also compactors for wet waste, polystyrene, EPS, and wood. We always recommend that you consult with us if you wish to use your compactor for any other materials than the listed and recommended materials.
Is a compactor safe to operate?
A compactor is very safe to operate and requires no special skills. All compactors are reliable and thoroughly tested to ensure that they meet the highest safety standards. Everyone can safely load the machine. All mechanical and electrical parts are placed inside the machine, out of reach for users. Furthermore, several safety features are in place to protect the user. The control panel is placed on the outside of the machine and gives the user easy access to start the machine. An emergency stop is also placed on the control panel within fast and easy reach. Our compactors are manufactured by our trusted German collaborator, Presto. Presto has more than 50 years of experience within the area of environmental engineering and their products are highly recognized in the business. They all carry the EU CE marking and meet the essential requirements for health and safety set forth by the European Union. In addition, two machine groups are certified according to GS, Geprüfte Sicherheit, which means that they have been tested by a German state-approved independent laboratory to prove and ensure their safety. As a company, Presto is certified with the ISO 9001 and SmS, Sicherheit mit System, certificates, which means that the company assesses and considers the quality and safety requirements of their customers and the requirements of the applicable standard. This is your guarantee that each Presto product will meet or beat the highest requirements of safety anytime.
What kind of power supply is needed?
Our compactors use 3 L / N / PE; 400 V,50 Hz as standard. The static and mobile compactors use 16-32 amperes. The screw compactors usually use 63 amperes. You can check the required power supply for each compactor in the product specific tech specs.
How much waste do I need before I should consider a compactor solution?
There is no simple answer to this question. Compactors are designed to handle large amounts of waste, but there might be other reasons to choose a compactor solution as well. When we make an evaluation for you to determine your need for a compactor we consider the size of your company, your internal work structures and processes, waste handling procedures, your work flow, the time you spend handling waste, and your current solution. All these data help us determine the best solution for you to save time and money on your waste handling.
What’s the difference between a static compactor and a mobile compactor?
The difference between a static compactor and a mobile compactor is whether the press unit stays on-site or if it is attached to the container. A static compactor consists of two separate units – the press unit and the container unit. The press unit is bolted to a concrete base and stays on on-site. In a mobile compactor, the press unit is integrated with the container. This means that both the container and the press unit is picked up for emptying.
Füllen Sie das Formular aus und wir werden Sie kontaktieren

Fragen? Kontaktieren Sie uns noch heute

arrow up
arrow down
arrow left
arrow right
arrow left
arrow right
Sales
Jørgen Lassen.jpg
Jürgen Lassen
International Sales Director
[protected phone]
[protected email]
LinkedIn logo
Interzero-coco.jpg
Corentin Cleuziat
[protected phone]
[protected email]
LinkedIn logo